Removal Procedure
- Remove the rear door trim
panel. Refer to
Rear Side Door Trim Panel Replacement
.
- Remove the rear door water deflector. Refer to
Rear Side Door Water Deflector Replacement
.
- Remove the lock rod from the rear door inside door handle.
- Remove the handle rod from the rear door inside door handle.
- Remove the rear door inside handle (1) to rear door rivet (2).
5.1. | Use a center punch to drive the rear door inside handle mounting
rivet mandrel into the rivet head to create a pilot hole. |
5.2. | Use a 6.35 mm (1/4 in) drill bit to drill out the
rivet. |
- Remove the rear door inner door handle from the rear door.
Installation Procedure
- Install the rear door
inner door handle by inserting the tabs into the inner door panel slots.
- Install the lock rod to the rear door inner door handle.
Install the clip in order to secure the lock rod.
- Install the handle rod to the rear door inner door handle.
Install the clip in order to secure the handle rod.
- Install the rivet (2) to the rear door inner door handle.
- Install the rear door water deflector. Refer to
Rear Side Door Water Deflector Replacement
.
- Install the rear door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.