Removal Procedure
- Position the front door
window in the full up position.
- Remove the front door trim panel. Refer to
Front Side Door Trim Panel Replacement
.
- Remove the front door inside handle to front door rivet.
3.1. | Use a center punch to drive the front door inside handle mounting
rivet mandrel into the rivet head to create a pilot hole. |
3.2. | Use a 6.35 mm (1/4 in) drill bit to drill out the
rivet. |
- Open the inside door handle clips in order to remove the handle
rods (2) from the inside door handle.
- Remove the front door inside door handle.
Installation Procedure
- Position the front door
handle tabs (1) in the front door.
- Install the clips in order to install the lock rods (2)
to the front door inside handle.
- Install the rivet (3).
- Install the front door trim panel. Refer to
Front Side Door Trim Panel Replacement
.
- Close the front door window.