GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 315937  Size: MH
  1. Remove the rear door outer belt sealing strip screw.
  2. Lift to emove the sealing strip (3) from the door flange.

Installation Procedure


    Object Number: 315937  Size: MH
  1. Install the sealing strip (3) into place on the door flange.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the rear door outer belt sealing strip screw.
  4. Tighten
    Tighten the outer belt sealing strip machine screw to 2 N·m (18 lb in).