GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2001 🢒 Grand Prix 🢒 Body and Accessories 🢒 Doors 🢒 Power Mirror Replacement

Removal Procedure

    Object Number: 315725 Size: SH
  1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Disconnect the electrical connectors.
  3. Remove the mirror reinforcement cover.
  4. Remove the nuts from the mirror.
  5. Remove the mirror from the front door .

Installation Procedure

    Object Number: 315725 Size: SH
  1. Position the mirror to the front door.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the nuts to the mirror, starting at the lower left nut.

    3. Tighten
    Tighten the outside mirror nuts to 10 N·m (89 lb in).

  3. Install the mirror reinforcement cover.
  4. Connect the electrical connectors.
  5. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .