Removal Procedure
- Remove the instrument
panel cluster (IPC) trim plate. Refer to
Instrument Cluster Trim Panel Replacement
in Instrument Panel, Gages and Console.
- Grasp the headlamp switch and pull firmly to release the retaining
tabs from the instrument panel.
- Disconnect the electrical connector from the headlamp switch.
- Remove the headlamp switch.
Installation Procedure
- Connect the electrical
connector to the headlamp switch.
- Align the headlamp switch to the instrument panel, then press
into place to secure the retainers.
- Install the IPC trim plate. Refer to
Instrument Cluster Trim Panel Replacement
in Instrument Panel, Gages
and Console.