Removal Procedure
- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Remove the left inner rear fender.
- Disconnect the EVAP vent valve electrical connector (1).
- Disconnect the vent hose (4) from the EVAP vent valve.
- Remove the EVAP vent valve from the bracket (2).
Installation Procedure
- Install the EVAP vent valve on to the bracket (2).
- Connect the vent hose (4) to the EVAP vent valve.
- Connect the EVAP vent valve electrical connector (1).
- Install the left inner rear fender.
- Lower the vehicle.