Removal Procedure
- Open the rear compartment lid.
- Remove the rear compartment convenience net and retainers.
- Remove the OnStar vehicle communication unit (VCU), if equipped.
Refer to
OnStar Vehicle Communication Unit Replacement
in Cellular Communications.
- Remove the rear compartment
mat from the rear compartment.
- Remove the spare tire
cover from the rear compartment.
- Remove the rear compartment trim panel to rear compartment retainers
located near the rear compartment lid lock striker.
- If equipped with rear split folding seats, remove the rear seat
back. Refer to
Rear Seat Back Replacement
in Seats.
- Fold the left and right side of the rear compartment trim panel
toward the center of the rear compartment.
- Fold the rear of the rear
compartment trim panel toward the center of the rear compartment
- Remove the left and right side of the rear compartment trim panel
from the vehicle.
Installation Procedure
- Align the left rear compartment
trim panel to the vehicle.
- Align the right rear compartment trim panel to the vehicle.
- Apply pressure to the left, right and rear of the rear compartment
trim panel until fully seated.
- Install the rear compartment trim panel to rear compartment retainers
located near the rear compartment lid lock striker.
- Install the spare tire
cover to the rear compartment.
- Install the rear compartment
mat to the rear compartment.
- If equipped with rear split folding seats, install the rear seat
back. Refer to
Rear Seat Back Replacement
in
Seats.
- Install the OnStar vehicle communication unit (VCU) if equipped.
Refer to
OnStar Vehicle Communication Unit Replacement
in Cellular Communications.
- Install the rear compartment convenience net and retainers.
- Close the rear compartment lid.