GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2001 🢒 Grand Prix 🢒 Engine 🢒 Engine Electrical 🢒 Generator Bracket Replacement

Removal Procedure
  1. Disconnect the negative battery cable from the battery. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the generator. Refer to Generator Replacement .

    3. Object Number: 302507 Size: SH
  3. Remove the generator bracket bolts.
  4. Remove the generator bracket.

Installation Procedure

    Object Number: 302507 Size: SH
  1. Install the generator bracket to the engine.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install and finger tighten the generator bracket bolts.

    3. Tighten
    Tighten the generator bracket bolts to 50 N·m (37 lb ft).

  3. Install the generator. Refer to Generator Replacement .
  4. Connect the negative battery cable to the battery. Refer to Battery Negative Cable Disconnection and Connection .