| Table 1: | Theft Deterrent/Shock Sensor Customization Table |
| Table 2: | Theft Deterrent Arm/Disarm Customization Table |
Important: If the ignition switch is moved to the OFF position during in the customization procedure, the theft deterrent/shock sensor customization procedure will be terminated. The system will remain in the most recent mode.
- Remove the MALL PGM fuse from the instrument panel fuse block.
- Turn the ignition to the ACC position. The chime will sound 4 times.
- Turn the park lamp switch to the ON position and back to the OFF position.
- The mode number advances each time that the park lamp switch is turned ON. A transition part mode 4 will repeat, starting again at mode 1.
The seatbelt indicator flashes and the chime sounds 1-4 times. These actions indicate which mode the vehicle is in.
Complete the following steps in order to exit and save the current customization:
| 4.1. | Turn the ignition OFF. |
| 4.2. | Customize any other features. |
| 4.3. | Replace the MALL PGM fuse back into the fuse block. |
Mode | Theft Deterrent | Shock Sensor | Warnaway |
|---|---|---|---|
1* | Enabled | Enabled | Disabled |
2 | Enabled | Disabled | Disabled |
3 | Disabled | Disabled | Disabled |
4* | Enabled | Enabled | Enabled |
* On vehicles without the shock sensor Modes 1 and 4 are not functional. | |||
Theft Deterrent/ Shock Sensor Modes
The theft deterrent/ shock sensor modes have the following features:
| • | Mode 1 |
| The horn sounds and the headlamps flash for 2 minutes if any of the following actions occur while the content theft deterrent system is armed: |
| - | The shock sensor is triggered. |
| - | Any door is opened. |
| - | The rear compartment lid is opened. |
| • | Mode 2 |
| The horn sounds and the headlamps flash for 2 minutes if any of the following actions occur while the content theft deterrent system is armed. The system ignores the shock sensor: |
| - | Any door is opened. |
| - | The rear compartment lid is opened. |
| • | Mode 3 |
| The content theft deterrent system remains disarmed at all times. |
| • | Mode 4 |
| - | The following actions occur if any door or the rear compartment lid is open while the system is armed: |
| • | The horn sounds. |
| • | The headlamps flash for 2 minutes. |
| - | The following actions occur if the shock sensor is triggered: |
| • | The horn sounds. |
| • | The headlamp flashes five times rapidly. |
| • | The system rearms. |
| - | The following actions occur when the shock sensor is triggered 5 times: |
| • | The horn sounds. |
| • | The headlamps flash for 2 minutes. |
Theft Deterrent Arm/Disarm Customization
Important: If the ignition switch is moved to the OFF position during the customization procedure, the theft deterrent arm/disarm customization procedure will be terminated. The system will remain in the most recent mode.
To customize the theft deterrent arm/disarm control features:
- Remove the MALL PGM fuse from the instrument panel fuse block.
- Turn the ignition to the ACC position. The chime will sound 1-4 times.
- Insert the door lock key into the door lock cylinder.
- Rotate and leave the key in the UNLOCK position.
- Press the transmitter alarm button. The seatbelt indicator flashes and the chime sounds 1-4 times. These actions indicate which mode the vehicle is in.
- The mode number advances each time that the transmitter alarm button is pressed. A transition part mode 3 will repeat, starting again at mode 1.
Complete the following steps in order to exit and save the current customization:
| 6.1. | Turn the ignition OFF. |
| 6.2. | Customize any other features. |
| 6.3. | Replace the MALL PGM fuse back into the fuse panel. |
Mode | Lock Cylinder Disarming | Lock Switch Arming |
|---|---|---|
1 | Enabled | Disabled |
2 | Disabled | Disabled |
3 | Enabled | Enabled |
Theft Deterrent Arm/Disarm Modes
The theft deterrent arm/disarm modes have the following features:
| • | Mode 1 |
| - | The system arms when you use the keyless entry transmitter in order to lock the doors. |
| - | The system disarms when you use the key or the keyless entry transmitter in order to unlock the doors. |
| - | The system does not arm when you use either of the power door lock switches in order to lock the doors. |
| • | Mode 2 |
| - | The system arms when you use the keyless entry transmitter in order to lock the doors. |
| - | The system disarms when you use the keyless entry transmitter in order to unlock the doors. |
| - | The system does not disarm when you use a key in order to unlock the doors. |
| • | Mode 3 |
| - | The system arms when you use either power door lock switch or the keyless entry transmitter in order to lock the doors. |
| - | The system disarms when you use the key or the keyless entry transmitter in order to unlock the doors. |
Mode 2 provides increased security, but the only way to disarm the system is to press unlock on the keyless entry transmitter. This can cause difficulty if the keyless entry transmitter is damaged or lost, or if the transmitter fails to operate. When the system is armed, the content theft deterrent system's fuel disable feature prevents the engine from starting.
