GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Grand Prix 🢒 Body and Accessories 🢒 Wiring Systems 🢒 Diagnostic System Check - Theft Deterrent

Test Description

The number(s) below refer to the step number(s) on the diagnostic table.

  1. Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.

    2.

  3. The presence of DTCs which begin with "U" indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.

Step

Action

Yes

No

1

Install a scan tool.

Does the scan tool power up?

Go to Step 2

Go to Scan Tool Does Not Power Up in Data Link Communications

2

  1. Turn ON the ignition, with the engine OFF.
  2. Attempt to establish communication with the following:
    3. • Powertrain Control Module (PCM)
    • Theft deterrent module

Does the scan tool communicate with the PCM and theft deterrent module?

Go to Step 3

Go to Scan Tool Does Not Communicate with Class 2 Data Line in Data Link Communications

3

Select the display DTCs function on the scan tool for the following modules:

    • PCM
    • Theft deterrent module

Does the scan tool display any DTCs?

Go to Step 4

Go to Symptoms - Theft Deterrent

4

Does the scan tool display any DTCs which begin with a "U"?

Go to Scan Tool Does Not Communicate with Class 2 Data Line in Data Link Communications

Go to Diagnostic Trouble Code (DTC) List/Type