GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Pontiac
🢒
2000
🢒
Grand Prix
🢒
Body and Accessories
🢒
Lighting Systems
🢒 Hazard and Turn Signal Flasher Replacement
Removal Procedure
Remove the left instrument panel (IP) insulator. Refer to
Instrument Panel Insulator Panel Replacement - Left Side
in Instrument Panel, Gages and Console.
Remove the steering column filler panel. Refer to
Steering Column Opening Filler Replacement
in Instrument Panel, Gages and Console.
Slide the hazard and turn signal flasher to the right, releasing the tabs from the Body Control Module (BCM) bracket.
Disconnect the electrical connector from the hazard and turn signal flasher.
Installation Procedure
Connect the electrical connector to the hazard and turn signal flasher.
Position the hazard and turn signal flasher to the BCM bracket. slide the flasher to the left, securing the flasher tabs into the retaining slots on the bracket.
Install the steering column filler panel. Refer to
Steering Column Opening Filler Replacement
in Instrument Panel, Gages and Console.
Install the left IP insulator. Refer to
Instrument Panel Insulator Panel Replacement - Left Side
in Instrument Panel, Gages and Console.