For 1990-2009 cars only
Removal Procedure
- Disconnect the IAT sensor electrical connector.
- Loosen the air inlet hose clamp.
- Carefully remove the air inlet hose from the throttle body and air cleaner cover.
- Remove the 2 housing cover retaining Screws .
- Remove the air cleaner cover and carefully remove the air filter element.
- Inspect the housing cover (4), seal assembly, and air ducting (2) for damage. If a problem is found, replace as necessary.
Installation Procedure
- Connect the IAT sensor electrical connector.
- Tighten the air inlet hose clamp.
- Carefully reinstall the air inlet hose to the throttle body and air cleaner cover.
- Carefully install the air filter element into the air cleaner assembly (4).
- Reinstall the housing cover and reinstall the housing cover retaining screws.
