GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover


    Object Number: 316192  Size: SH
  1. Open the upper guide loop attachment cover of the upper seat belt.
  2. Remove the nut of the upper seat belt guide loop attachment.
  3. Remove the upper seat belt guide loop attachment from the adjuster bracket.
  4. Use J 38778 in order to remove the upper trim panel from the B-pillar.

Installation Procedure


    Object Number: 316192  Size: SH
  1. Install the upper trim panel to the B-Pillar.
  2. Push firmly on the upper trim panel in order to seat the retainers.
  3. Install the upper guide loop attachment of the upper seat belt to the adjuster bracket.
  4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the nut of the upper seat belt guide loop attachment.
  6. Tighten
    Tighten the guide loop attachment nut to 42 N·m (31 lb ft).