For 1990-2009 cars only
Removal Procedure
- Unfasten the J-retainers on both side of the seat cushion cover.
- Slide the cushion cover up in order to expose the recliner to seat back attachment.
- Disconnect the electric lumbar connection if equipped with power lumbar.
- Remove the recliner to seat back frame pivot bolts.
- Remove the roll pins from the recliner to seat back. Discard the roll pins.
- Remove the seat back from the seat cushion.
- Remove the front seat back cover. Refer to Front Seat Back Cushion Cover Replacement .
- Remove the front seat back pad. Refer to Front Seat Back Cushion Pad Replacement .
- Separate the front seat back frame from the seat back pad.
Installation Procedure
- Install the front seat back frame to the seat back pad.
- Install the front seat back pad. Refer to Front Seat Back Cushion Pad Replacement .
- Install the roll pins to the recliner to the seat back. Use new roll pins.
- Install the recliner to seat back frame pivot bolts.
- Connect the electric lumbar connection if equipped with power lumbar.
- Slide the cushion cover down and fasten the J-retainers.
- Install the front seat back cover. Refer to Front Seat Back Cushion Cover Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the recliner to seat back frame pivot bolts to 24 N·m
(18 lb ft).
