Removal Procedure
- Remove the driver information center (DIC)/trip calculator. Refer
to
Driver Information Center Module Replacement
.
- Remove the remote control door lock receiver (1)
from the air distribution duct by releasing the snap tabs.
- Disconnect the electrical connector (2) of the remote control
door lock receiver (1).
Installation Procedure
- Connect the electrical connector (2) of
the remote control door lock receiver (1).
- Install the remote control door lock receiver (1) to the
air distribution duct by engaging the snap tabs.
- Install the driver information center (DIC)/trip calculator. Refer
to
Driver Information Center Module Replacement
.