Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Does the test light illuminate? | -- | Go to Step 3 | Go to Step 8 |
2 | Repair a poor connection or an open in circuit 1450 between the hazard lamp/turn signal lamp flasher harness connector terminal B2 to G200. Has the repair been made? | -- | -- | |
3 | Using a test light, backprobe between the hazard lamp/turn signal flasher harness connector terminal B2 and B+. Does the test light illuminate? | -- | Go to Step 5 | Go to Step 2 |
4 | Replace the hazard lamp/turn signal flasher. Refer to Hazard and Turn Signal Flasher Replacement . Has the repair been made? | -- | -- | |
5 | Using a test light, backprobe between the hazard lamp/turn signal lamp flasher connector terminal C1 and terminal B2. Does the test light flash? | -- | Go to Step 7 | Go to Step 4 |
6 | Repair a poor connection or an open in circuit 16. Has the repair been made? | -- | -- | |
7 | Using a test light, backprobe connector C201 terminal A4 to ground. Does the test light flash? | -- | Go to Step 9 | Go to Step 6 |
8 | Repair a poor connection or an open in circuit I508. Has the repair been made? | -- | -- | |
9 | Replace the turn signal switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in steering wheel and column. Has the repair been made? | -- | -- |
