1. Inspect the suspected fog lamp bulbs for damage or an open filament.
2. Inspect the left and the right fog lamp connectors for a damaged or missing connector seal.

Are the fog lamp bulbs and the connectors OK?

--

Go to Step 2

Go to Step 7

1. Turn the headlamp switch to the HEAD position.
2. Turn the headlamp dimmer switch to the LOW position.
3. Turn the fog lamp switch to the ON position.
4. Using a test light, backprobe between the terminal A of the inoperable fog lamp harness connector and ground.

Does the test light illuminate?

--

Go to Step 4

Go to Step 3

Repair a poor connection or an open in the following locations:

Has the repair been made?

--

Go to Fog Lights System Check

--

Using a test light, backprobe between the inoperable fog lamp harness connector terminal A and terminal B.

Does the test light illuminate?

--

Go to Step 6

Go to Step 5

Repair a poor connection or an open in circuit 1350 between the fog lamp harness connector terminal B and G101.

Has the repair been made?

--

Go to Fog Lights System Check

--

Replace the fog lamp bulb. Refer to Front Fog Lamp Replacement .

--

Go to Fog Lights System Check

--

Replace the damaged component.

Has the repair been made?

--

Go to Fog Lights System Check

--