The IP dimmer switch controls the following components:
| • | The brightness of the incandescent lamps |
| • | The Vacuum Fluorescent (VF) displays |
The incandescent lamps are located in various components. The VF displays
are located in the radio.
Incandescent Dimming
The IP dimmer switch produces a variable voltage signal which determines
the brightness of the incandescent lamps.
Vacuum Fluorescent (VF) Dimming
The VF dimming signal controls the brightness of the VF displays. The
VF display of the radio will dim for low light viewing with the park lamps
ON. The VF displays are at high brightness for daytime viewing with
the park lamps OFF. When the park lamps are ON, the IP lamp dimmer switch
provides a signal (VF Dimming Signal circuit 230) which controls
the brightness of the VF displays when the IP dimmer switch is adjusted.
Park Lamp Dimming
When the park lamps are ON, the park lamps on signal (circuit 308)
applies to the following components resulting in the dimming of the components
for night time viewing:
| • | The heater and A/C control (CJ2) |
