1. Turn the headlamp switch to the HEAD position.
2. Turn the headlamp dimmer switch to the HIGH position.
3. Using a DMM, measure the voltage in circuit 11 between the instrument cluster harness connector C2 terminal G and ground.

Is the voltage within the specified range?

9-14 V

Go to Step 3

Go to Step 2

Repair a poor connection or open in circuit 11 between S219 and the instrument cluster harness connector C2 terminal G.

Has the repair been made?

--

Go to Daytime Running Lights (DRL) System Check

--

Inspect the high beam indicator bulb. If OK, service the instrument cluster. Refer to Instrument Cluster Replacement .

Has the repair been made?

--

Go to Daytime Running Lights (DRL) System Check

--