Removal Procedure
- Remove the instrument
panel (IP) cluster trim plate. Refer to
Instrument Cluster Trim Panel Replacement
in Instrument Panel, Gauges and
Console.
- Grasp the headlamp switch and pull firmly to unsnap the retaining
tabs from the IP.
- Disconnect the electrical connector from the switch.
- Remove the headlamp switch.
Installation Procedure
- Connect the electrical
connector to the headlamp switch.
- Align the headlamp switch to the IP, then press into place to
secure the retainers.
- Install the IP cluster trim plate. Refer to
Instrument Cluster Trim Panel Replacement
in Instrument
Panel, Gauges and Console.