Data Link Communications Schematic Icons. Pontiac Grand Prix 1999

For 1990-2009 cars only

Makes 🢒 Pontiac 🢒 1999 🢒 Grand Prix 🢒 Body and Accessories 🢒 Data Link Communications 🢒 Data Link Communications Schematic Icons

Icon

Icon Definition

Refer to

Notice: Electrostatic discharge (ESD) can damage many solid-state electrical components. ESD susceptible components may or may not be labeled with the ESD symbol. Handle all electrical components carefully. Use the following precautions in order to avoid ESD damage:

•	Touch a metal ground point in order to remove your body's static charge before servicing any electronic component; especially after sliding across the vehicle seat.

•	Do not touch exposed terminals. Terminals may connect to circuits susceptible the ESD damage.

•	Do not allow tools to contact exposed terminals when servicing connectors.

•	Do not remove components from their protective packaging until required to do so.

•	Avoid the following actions unless required by the diagnostic procedure:

-	Jumpering or grounding of the components or connectors.

-	Connecting test equipment probes to components or connectors. Connect the ground lead first when using test probes.

•	Ground the protective packaging of any component before opening. Do not rest solid-state components on metal workbenches, or on top of TVs, radios, or other electrical devices.

Refer to

Caution: When you are performing service on or near the SIR components or the SIR wiring, you must disable the SIR system. Refer to Disabling the SIR System. Failure to follow the correct procedure could cause air bag deployment, personal injury, or unnecessary SIR system repairs.

Refer to

Notice: The OBD II symbol is used on the circuit diagrams in order to alert the technician that the circuit is essential for proper OBD II emission control circuit operation. Any circuit which fails and causes the malfunction indicator lamp (MIL) to turn ON, or causes emissions-related component damage, is identified as an OBD II circuit.