Removal Procedure
- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Bend the EVAP Vent valve
retaining tab.
- Remove the valve from the EVAP vent valve bracket.
- Disconnect the EVAP vent valve electrical connector.
- Loosen the vent hose clamp and remove the vent hose from the EVAP
vent valve.
- Remove the EVAP vent valve from the vehicle.
Installation Procedure
- Install the EVAP vent solenoid.
- Install the vent hose.
- Connect the electrical connector.
- Install the EVAP vent solenoid.