Removal Procedure
- Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
in
engine electrical.
- Disconnect the IAT sensor
electrical connector.
- Disconnect the MAF sensor electrical connector.
- Remove the air inlet duct from the MAF sensor and the throttle
body.
- Remove the MAF sensor (1) from air filter housing.
Installation Procedure
- Carefully install MAF
sensor (1) to air inlet grommet.
- Attach the MAF sensor to air inlet duct and install the air inlet
duct.
- Connect the MAF sensor electrical connector.
- Connect the IAT sensor electrical connector.
- Reconnect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
in
engine electrical.