For 1990-2009 cars only
Removal Procedure
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Suitably support the exhaust system.
- Remove the exhaust pipe hangers.
- Inspect the three-way catalytic converter brackets for serviceability. Repair or replace as necessary.
Notice: To prevent internal damage to the flexible coupling of the catalytic converter assembly, the converter must be supported. The vertical movement at the rear of the catalytic converter assembly must not exceed 6 degrees up or down.
Installation Procedure
- Install the exhaust pipe hangers.
- Remove the support from the exhaust system and vehicle.
- Lower the vehicle.
- Inspect the exhaust system for leaks and underbody contact.
