---------------------------------------------------------------------- INFORMATION ----------------------------------------------------------------------
CUSTOMERS WHO TRAVEL ON GRAVEL ROADS INCREASE THE CHANCE OF STONE CHIPS ON THEIR CARS. THE LOWER PORTION OF THE REAR QUARTER MOLDING IS ONE AREA THAT MAY BE AFFECTED. FOR CUSTOMERS DESIRING ADDITIONAL PROTECTION FROM POTENTIAL STONE CHIPS, A CLEAR PROTECTIVE FILM PART IS AVAILABLE FOR EACH SIDE MOLDING. CUSTOMERS MAY FIND THESE MORE VISUALLY PLEASING THAN OTHER AFTER MARKET PRODUCTS SUCH AS MUD GUARDS.
10274615 PROTECTOR - RR QTR LWR MLDG LH 10274616 PROTECTOR - RR QTR LWR MLDG RH
PARTS ARE SUITABLE FOR USE ON UNDAMAGED, OR REPAIRED/REPAINTED MOLDINGS.
**BEFORE INSTALLING, DRY FIT THE PART TO BECOME FAMILIAR WITH POSITIONING REQUIREMENTS.**
TO INSTALL THE PROTECTORS, FOLLOW THE "STRIPS AND DECALS", "INSTALL OR CONNECT" INSTRUCTIONS - SECTION 10-1-2 OF THE 1995 "W" SERVICE MANUAL.
POSITION THE TOP EDGE APPROXIMATELY 3" (75 MM) BELOW THE LOWER FEATURE GROOVE AND THE REAR EDGE 1/4" (6 MM) FORWARD OF THE WHEEL OPENING. (THE LARGE NOTCH IS FORWARD, THE SMALL NOTCH LOW AND REARWARD.)
THE FRONT EDGE WRAPS INTO THE DOOR OPENING AND THE LOWER EDGE UNDER THE MOLDING.
PARTS WILL BE AVAILABLE FROM GMSPO ON MARCH 6, 1995.
FIGURES: 0
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1994 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.