LABOR OPERATION NUMBERS AND TIME ALLOWANCE FOR AERO MOLDINGS Revised to correct the last two operations listed on the bulletin.
The following Labor Operations are for removal, replacing, color coating, and clear coating of the Aero moldings on the Bonneville SSE.
COLOR CLEAR OPERATION R/R COAT COAT NUMBER DESCRIPTION ITEM TIME TIME TIME --------- ----------- ---- ---- ---- ---- B9530 Frt/Fender Outer Lower R/H 35 .2 .2AB .2CA B9531 Frt/Fender Outer Lower L/H 35 .2 .2AB .2CA B9550 Frt/Door Outer Lower R/H 32 .2 .3AB .2CA B9551 Frt/Door Outer Lower L/H 32 .2 .3AB .2CA B9554 Rr/Door Outer Lower R/H 33 .2 .3AB .2CA B9555 Rr/Door Outer Lower L/H 33 .2 .3AB .2CA B9570 Rocker Outer R/H 37 .2 .4AB .2CA B9571 Rocker Outer L/H 37 .2 .4AB .2CA B9590 Quarter Outer Lower R/H 38 .2 .3AB .2CA B9591 Quarter Outer Lower L/H 38 .2 .3AB .2CA B8280 Rr/Wheel Opening Molding R/H 34 .2 .2AB .2CA B8281 Rr/Wheel Opening Molding L/H 34 .2 .2AB .2CA B7480 Frt/Wheel Opening Molding R/H ** .4 .2AB .2CA B7481 Frt/Wheel Opening Molding L/H ** .4 .2AB .2CA
** Item not shown in Illustration.
The procedures used to color coat and clear coat the Aero moldings are the same as used on the bumper fascias.
The Illustration and Item Numbers used in this bulletin are from the service parts manual 12.000 group.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.