PRODUCT SAFETY CAMPAIGN 88-C-03 TRANSMISSION SHIFT CABLE ATTACHMENT
The National Traffic and Motor Vehicle Safety Act, as amended, provides that each vehicle which is subject to a recall campaign of this type must be adequately repaired within a reasonable time after the owner has tendered it for repair. A failure to adequately repair within sixty (60) days after tender of a vehicle is prima facie evidence of failure to repair within a reasonable time.
If the condition is not adequately repaired within a reasonable time, the owner may be entitled to an identical or reasonable equivalent vehicle at no charge or to a refund of the purchase price less a reasonable allowance for depreciation.
To avoid having to provide these burdensome solutions, every effort must be made to promptly schedule an appointment with each owner and to repair their vehicle as soon as possible. As you will see in reading the attached copy of the letter which is being sent to owners, the owners are being instructed to contact the Pontiac Customer Assistance Center if their dealer does not remedy the condition within five (5) days of the mutually agreed upon service date. If the condition is not remedied within a reasonable time, owners are instructed on how to contact the National Highway Traffic Safety Administration.
General Motors has determined that a defect which relates to motor vehicles safety may exist in certain 1988 Pontiac Grand Prix model vehicles. A potential interference between the transmission shift cable and the bellcrank clip in the steering column can result in disengagement of the transmission cable. This could allow the transmission to be in a gear other than that displayed by the shift indicator. This condition could cause the vehicle to move in an unexpected direction and cause a vehicle crash without prior warning.
To prevent the possibility of this condition occurring, a newly designed bellcrank clip will be installed on all involved vehicles.
Involved are certain 1988 Pontiac Grand Prix model vehicles produced within the following VIN breakpoints:
Year Plant Beginning Up to and Including ---- ----- --------- -------------------
1988 Fairfax JF200069 JF201573
Involved vehicles have been identified by Vehicle Identification Number computer Listings. Computer listings contain the complete Vehicle Identification Number, owner name and address data, and are furnished to the involved dealers with the campaign bulletin. Owner name and address data furnished will enable dealers to follow up with owners involved in this campaign.
These listings may contain owner names and addresses obtained from State Motor Vehicle Registration Records. The use of such motor vehicle registration data for any other purpose is a violation of law in several states. Accordingly, you are urged to limit the use of this listing to the follow-up necessary to complete this campaign. Any dealer not receiving a computer listing with the campaign bulletin has no involved vehicles currently assigned.
Owners will be notified of this campaign on their vehicles by Pontiac Division (see copy of Owner Letter included with this bulletin).
Dealers are to service all vehicles subject to this campaign at no charge to owners, regardless of mileage, age of vehicle, or ownership from this time forward.
Whenever a vehicle subject to this campaign is taken into your new or used vehicle inventory, or it is in your dealership for service in the future, you should take the steps necessary to be sure the campaign correction has been made before reselling or releasing the vehicle.
Owners of vehicles recently sold from your new vehicle inventory are to be contacted by the dealer, and arrangements made to make the required modification according to instructions contained in this bulletin.
Parts required to complete this campaign are to be obtained from General Motors Service Parts Operation (GMSPO). To ensure that these parts are obtained as soon as possible, they should be ordered on a C.I.O. order with no special instruction code, but on advise code (2) .
Description Part Number Quantity Per Vehicle ----------- ----------- --------------------
Clip - Bell Crank 25089331 1
Bellcrank Clip Replacement
1. Place shift lever in "Park", disconnect negative battery cable and remove lower dash panel.
2. Remove shift cable from steering column ball stud.
3. Remove bellcrank clip (with shift indicator cable still attached) from bellcrank hole.
4. Disconnect shift indicator cable from removed bellcrank hole and reconnect it to new clip (P/N 25089331) being careful to use correct hook (See Figure 1, View B) .
5. Install (snap) new bellcrank clip in bellcrank hole. While pushing clip into hole it may be helpful to apply a simultaneous side load.
6. Reinstall shift cable on steering column ball stud.
7. Set parking brake, place shift lever in "Neutral" and check alignment of shift (PRNDL) indicator. Both alignment dots below the "N" should be colored orange. If adjustment is necessary, loosen T-adjuster fore or aft until proper alignment exists. Hand tighten screw and place shifter in "Park".
8. Reinstall lower dash panel and reconnect negative battery cable.
9. Install Campaign Identification Label.
Each vehicle modified in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label." Each label provides a space to include the Campaign number, the five (5) digit dealer code of the dealer performing the campaign service, and the date the vehicle was campaigned. This information may be inserted with a typewriter or a ball point pen. Install the label only on a clean, dry surface of the radiator baffle where it is readily visible. (Additional campaign labels are available on stationery order as Form 7901-709).
A separate repair order must be used for each vehicle. A completed warranty claim is to be kept as a permanent record of completion.
DEALERS SHOULD SUBMIT WARRANTY CLAIM FOR CREDIT IN THEIR NORMAL MANNER WHEN THEY PERFORM THE SERVICE AS FOLLOWS:
Other * Failure Labor Labor Labor Operation Code Operation Hours Hours --------- ------- --------- ------ -------
Replace Bellcrank clip 96 V4620 0.3 0.1
* In addition, dealerships will receive 0.1 hours credit for dealer administrative services associated with this campaign. The 0.1 hours allowance is to be entered in the "Other Labor Hours" field with each campaign repair listed for credit. This entry will not require authorization.
FAILURE CODE 96 MUST BE USED WITH THE LABOR OPERATION.
Parts required are to be listed in your warranty claim in the normal manner. Parts will be credited at dealer net plus 30% dealer handling allowance.
Dealers will be credited via Warranty Document or Terminal Transmission, whichever is their normal method of submission for payment. Claim must contain all information required and should list t.he labor operation as outlined.
Repairs summitted for vehicles not involved in the campaign will not be paid.
Campaign completion will be recorded from COMPLETED AND PAID WARRANTY CLAIMS." Owners are being asked to present the Owner reply card for identification to their dealer at the time they bring in their vehicle to have the campaign performed.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.