Removal Procedure
- Remove the instrument
panel (IP) carrier panel. Refer to
Instrument Panel Carrier Replacement
in Instrument Panel, Gauges and Console.
- Remove the daytime running lights (DRL) sensor from the defroster
duct by turning 1/4 of a turn.
- Remove the two push on retainers holding the defroster duct to
the HVAC module.
- Remove the defroster duct retainers from the air distribution
duct.
- Remove the defroster duct.
Installation Procedure
- Align the defroster duct
to the air distribution duct and the HVAC module.
- Install the retainers on the defroster duct to the air distribution
duct.
- Install the two push on retainers holding the defroster duct to
the HVAC module.
- Install the DLR sensor to the defroster duct.
Turn 1/4 turn to lock in position.
- Install the IP carrier. Refer to
Instrument Panel Carrier Replacement
in Instrument Panel, Gauges and Console.