For 1990-2009 cars only
Clearing History DTCs
Important:: Before clearing DTCs, use the scan tool in order to record the Freeze Frame and the Failure Records for reference. Data will be lost when you use the Clear Info function.
After you have repaired the fault, clear history DTCs in the following ways:
| • | Use a scan tool |
| • | After 40 warm up cycles have been achieved without a fault present, history DTCs will be cleared automatically |
In order to clear the DTC default actions, perform the following procedure:
- Turn OFF the ignition for 10 seconds
- Turn ON the ignition and perform the scan tool clearing feature.
- Verify that the code has been cleared.
PCM Reprogramming
The controllers no longer feature a replaceable EPROM. Remove and replace the controller and the EEPROM chips as a unit. For the complete reprogramming procedure, refer to PCM Programming in the Powertrain Control Module.
