Step
| Action
| Normal Result(s)
| Abnormal Result(s)*
|
1
|
- Place the ignition switch in ON position.
- Place the heater and A/C controller mode switch in the OFF position.
- Place the blower motor switch in the HI position.
| Blower motor will
not operate.
|
Blower Motor Always On
|
2
|
- Place the heater and A/C controller mode switch in the heat position.
- Place the blower motor switch in the following positions:
| Blower motor speed
will increase from one position to the next.
|
|
* Refer to the appropriate symptom diagnostic table for the applicable
abnormal result.
|