The blower Motor and fan replacement procedure has been revised for 1985 'N' models equipped with a 3.0L V-6 engine.
Please update your 1985 Service Manual, with the following procedure:
Remove or Disconnect
1. Negative battery cable 2. Serpentine drive belt 3. Two (2) power steering pump bolts and set pump aside 4. Blower motor screws (5) 5. Wiring connector 6. Blower motor 7. Fan
Install or Connect
1. Blower motor and fan 2. Blower motor screws 3. Wiring connector 4. Power steering pump mounting screws (2) 5. Serpentine belt and adjust 6. Negative battery cable
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.