GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 GTO 🢒 Preface 🢒 Cautions and Notices 🢒 Headlamp Switch Replacement

Removal Procedure

    Object Number: 1360611 Size: SH
  1. Remove the instrument panel cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement in Instrument Panel, Gages and Console.
  2. Remove the left-hand instrument panel outer cover. Refer to Instrument Panel Outer Trim Cover Replacement .
  3. Remove the driver side outer duct. Refer to Instrument Panel Air Outlet Ducts Replacement in HVAC.
  4. From the rear of the switch (2), squeeze the retaining clips (3) on each side of the switch (2) and push the switch (2) part way from the cavity.
  5. Using a plastic flat-bladed tool, hold the retaining clips (3) depressed while slowly removing the switch (2) from it's cavity.
  6. Disconnect the wiring connector (1) and remove the switch (2) from the vehicle.

Installation Procedure

    Object Number: 1360611 Size: SH
  1. Connect the wiring connector (1) to the switch (2).
  2. Install the switch (2) to the panel, making sure the retaining clips (3) are engaged.
  3. Install the driver side outer duct. Refer to Instrument Panel Air Outlet Ducts Replacement in HVAC.
  4. Install the left-hand instrument panel outer cover. Refer to Instrument Panel Outer Trim Cover Replacement .
  5. Install the instrument panel cluster trim panel (1). Refer to Instrument Cluster Trim Panel Replacement in Instrument Panel, Gages and Console.