GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 GTO 🢒 Preface 🢒 Cautions and Notices 🢒 Driver Information Display Switch Replacement

Removal Procedure

    Object Number: 1361075 Size: SH
  1. Remove the instrument panel cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement .
  2. Remove the instrument panel center trim panel. Refer to Instrument Panel Center Trim Panel Replacement .
  3. Remove the HVAC control assembly. Refer to Heater and Air Conditioning Control Replacement in HVAC.
  4. From the rear of the switch (3), squeeze the retaining clips (2) on each side of the switch (3) and push the switch (3) part way from the panel (4).
  5. Using a plastic flat-bladed tool, hold the retaining clips (2) depressed while slowly removing the switch (3) from the panel (4).
  6. Disconnect the wiring connector (1) and remove the switch (3) from the vehicle.

Installation Procedure

    Object Number: 1361075 Size: SH
  1. Connect the wiring connector (1) to the switch (3).
  2. Install the switch (3) to the panel (4), making sure the retaining clips (2) are engaged.
  3. Install the HVAC control assembly. Refer to Heater and Air Conditioning Control Replacement in HVAC.
  4. Install the instrument panel center trim panel. Refer to Instrument Panel Center Trim Panel Replacement .
  5. Install the instrument panel cluster trim panel (1). Refer to Instrument Cluster Trim Panel Replacement .