GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 GTO 🢒 Body 🢒 Seats 🢒 Rear Seat Cushion Cover Replacement

Removal Procedure
  1. Remove the rear seat. Refer to Rear Seat Cushion Replacement .
  2. Remove the center rear seat cushion retaining screws, then the center rear seat cushion.

    3. Object Number: 1368597 Size: SH
  3. Unclip the seat cushion cover J-clips (1).
  4. Remove the seat cushion cover and the pad from the seat frame.

    5. Object Number: 1368598 Size: SH
  5. Fold the rear corners of the rear seat cushion cover (1) over the seat cushion pad.

    6. Object Number: 1368599 Size: SH
  6. While holding the rear seat cushion pad (1), pull the rear corners of the seat cushion cover (2) forwards and away from the rear seat cushion pad to disengage the hook and loop strips (3).
  7. Pull the rear seat cushion cover up and over the forward edge of the rear seat cushion pad and remove.

Installation Procedure

    Object Number: 1368600 Size: SH
  1. With the seat cushion cover (1), folded at the central horizontal strip of hook and loop, alight the center mark (2) on the rear seat cushion cover with the center mark (3) on the seat cushion pad.
  2. Press the folded edge of the rear seat cushion cover into the corresponding groove in the seat cushion pad to engage the hook and loop strip.
  3. With the seat cover folded at the two vertical strips of the hook and loop (4), press the seat back cover into the corresponding grooves (5) in the seat cushion pad.
  4. Roll the front corners of the rear seat cushion cover over the seat cushion pad.
  5. Roll the sides of the rear seat cushion cover over the seat cushion pad.
  6. Roll the rear corners of the rear seat cushion cover over the seat cushion pad.
  7. Position the seat cushion cover and the pad to the seat frame.

    8. Object Number: 1368597 Size: SH
  8. Clip the seat cushion cover J-clips (1).

    9. Notice: Refer to Fastener Notice in the Preface section.

  9. Install the center rear seat cushion, then the center rear seat cushion retaining screws.

    10. Tighten
    Tighten the center rear seat cushion retaining screws to 2 Nm (18 lb in).

  10. Install the rear seat. Refer to Rear Seat Cushion Replacement .