GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Pontiac
🢒
2005
🢒
GTO
🢒
Body
🢒
Seats
🢒 Driver or Passenger Seat Back Cushion Finish Panel Replacement
Removal Procedure
Important:
The front seat back rear cover retaining clips will require replacement.
Pull the lower corners of the front seat back rear cover (1) away from the seat (3), breaking the retaining clip (2) in two places.
While holding the side of the front seat back rear cover (2) out, pull the cover down to release the upper retaining clips (1).
Remove the seat back cover.
Installation Procedure
Replace the damaged retaining clip (2) on the front seat back rear cover (1) in two places.
Locate the upper retaining lug (1), in two places, with the seat back.
Push the front seat back rear cover (2) up and in at the lower edge to engage the two lower retaining clips.