GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 GTO 🢒 Body 🢒 Seats 🢒 Lumbar Support Knob Replacement

Removal Procedure

    Object Number: 1365013 Size: SH
  1. Remove the retaining screw cap (3) from the lumbar support knob.
  2. Remove the lumbar support knob retaining screw (2).
  3. Remove the lumbar support knob from the lumbar support shaft, then remove the lumbar support deflector ring (1).

Installation Procedure

    Object Number: 1365013 Size: SH
  1. Install the lumbar support deflector ring (1), then install the lumbar support knob to the lumbar support shaft.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the lumbar support knob retaining screw (2).

    3. Tighten
    Tighten the lumbar support knob retaining screw to 3.5 N·m (31 lb in).

  3. Install the retaining screw cap (3) to the lumbar support knob.