GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 GTO 🢒 Body 🢒 Bumpers 🢒 Front Bumper Fascia Upper Support Replacement

Removal Procedure
  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .

    2. Object Number: 1333697 Size: SH
  2. Remove the 3 screws (3) attaching the fascia support (2).
  3. Using a flat-bladed tool, unclip the retaining tab (1) from the sheet metal.
  4. Pull the fascia support (2) out to detach it from the vehicle.

Installation Procedure

    Object Number: 1333697 Size: SH
  1. Align the fascia support (2) to the slots in the fender, while pushing in slightly.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the front bumper fascia upper support screws (3).

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .