GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 GTO 🢒 Body 🢒 Body Rear End 🢒 Rear Compartment Lid Ajar Indicator Switch Replacement

Removal Procedure
  1. Open the rear compartment lid.

    2. Object Number: 1251184 Size: SH
  2. Remove the screw (2) and pull the lid ajar switch assembly (1) out far enough from the rear compartment lid (3) to gain access to the wiring harness connectors (4).
  3. Disconnect the wiring harness connectors (4).
  4. Remove the lid ajar switch (1).

Installation Procedure

    Object Number: 1251184 Size: SH
  1. Connect the wiring harness connectors (4) to the lid ajar switch (1).

    2. Position the rear compartment lid ajar switch (1) to the rear compartment lid (3).

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screw (2) to the lid ajar switch (1).

    3. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  3. Close the rear compartment lid.