Removal Procedure
- Open the fuel filler door.
- Remove the fuel filler cap and cover the opening with a rag, as required.
- Remove the 3 screws (2) attaching the fuel filler door assembly (3).
- Remove the fuel filler door (3) by withdrawing it rearward, ensuring
the gasket (1) is also removed.
Installation Procedure
- Align the fuel filler door (3) with the gasket (1) to the quarter
panel.
Notice: Refer to Fastener Notice in the Preface section.
- Install the 3 screws (2) attaching the fuel filler door (3)
to the quarter panel.
Tighten
Tighten the 3 screws to 2 N·m (18 lb in).
- If a new fuel filler door was replaced, make sure to install a new label to
the positions shown.
- Close the fuel filler door.