Removal Procedure
- Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
- Remove the rear seat back. Refer to Rear Seat Back Replacement in Seats.
- Remove the rear seat belt anchor bolt (1).
- Remove the upper quarter trim panel. Refer to Rear Quarter Upper Trim Panel Replacement in Interior Trim.
- Remove the rear seat belt upper guide bolt (4), wave washer (2) and seat belt spacer (1).
- Remove the rear seat belt retractor bolt (2) and remove rear seat belt assembly (1).
Installation Procedure
- Install the rear seat belt retractor (1) to the vehicle. Secure the retractor with the mounting bolt (2).
- Install the rear seat belt upper guide bolt (4), wave washer (2) and seat belt spacer (1).
- Install the upper quarter trim panel. Refer to Rear Quarter Upper Trim Panel Replacement in Interior Trim.
- Install the rear seat belt anchor bolt (1).
- Install the rear seat back. Refer to Rear Seat Back Replacement in Seats.
- Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the rear seat belt retractor bolt to 42.5 N·m (31 lb ft).
Tighten
Tighten the rear seat belt upper guide bolt to 42.5 N·m (31 lb ft).
Tighten
Tighten the rear seat belt anchor bolt to 42.5 N·m (31 lb ft).
