GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2004 🢒 GTO 🢒 HVAC 🢒 Heating, Ventilation and Air Conditioning 🢒 Air Conditioning Compressor Bracket Replacement

Removal Procedure

    Object Number: 299792 Size: SH
  1. Remove the compressor. Refer to Air Conditioning Compressor Replacement .
  2. Remove the compressor drive belt tensioner from the compressor mounting bracket.
  3. Remove the compressor drive belt idler pulley from the compressor mounting bracket.

    4. Object Number: 282957 Size: SH
  4. Remove the compressor bracket mounting bolts.
  5. Remove the compressor bracket.

Installation Procedure

    Object Number: 282957 Size: SH
  1. Install the compressor mounting bracket to the engine block.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the compressor bracket mounting bolts.

    3. Tighten
    Tighten the bolt to 50 N·m (37 lb ft).


    Object Number: 299792 Size: SH
  3. Install the compressor drive belt idler pulley to the compressor mounting bracket.

    4. Tighten
    Tighten the compressor drive belt idler pulley to 50 N·m (37 lb ft).

  4. Install the compressor drive belt tensioner to the compressor mounting bracket.

    5. Tighten
    Tighten the compressor drive belt tensioner to 25 N·m (18 lb ft).

  5. Install the compressor. Refer to Air Conditioning Compressor Replacement .