Removal Procedure
- Ensure that the radio is turned off.
- Remove the rear quarter trim panel. Refer to
Rear Quarter Trim Panel Replacement
in Interior Trim.
- Remove the speaker retaining screws (1).
- Pull the speaker away from the quarter panel, then disconnect the speaker
electrical connector (2).
- Remove the speaker from the vehicle.
Installation Procedure
- Position the speaker in the vehicle.
- Connect the speaker electrical connector (2)
Notice: Refer to Fastener Notice in the Preface section.
- Install the speaker retaining screws (1).
Tighten
Tighten the speaker retaining screws to 2 N·m (18 lb in).
- Install the rear quarter trim panel. Refer to
Rear Quarter Trim Panel Replacement
in Interior Trim.