GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Ensure that the radio is turned off.
  2. Remove the hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement in Interior Trim.
  3. Remove the rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement in Interior Trim.
  4. Remove the rear window trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.

  5. Object Number: 1358328  Size: SH
  6. Disconnect the antenna cable connector (1), from the antenna amplifier.
  7. From under the instrument panel, disconnect the antenna cable connector (2), from the antenna extension cable
  8. Unclip the antenna cable from the retaining clips.
  9. Remove the antenna cable from the vehicle.

Installation Procedure

  1. Position the antenna cable in the vehicle.

  2. Object Number: 1358328  Size: SH
  3. Clip the antenna cable in the retaining clips.
  4. From under the instrument panel, connect the antenna cable connector (2), from the antenna extension cable
  5. Connect the antenna cable connector (1), to the antenna amplifier.
  6. Install the rear window trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.
  7. Install the rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement in Interior Trim.
  8. Install the hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement in Interior Trim.
  9. Check radio reception.