GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 G8 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Front Seat Heater Control Module Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.

    Warning: Refer to SIR Warning in the Preface section.


    Object Number: 2041134 Size: SH
  1. Disconnect the vehicle battery. Refer to Battery Negative Cable Disconnection and Connection.
  2. Disable the SIR system. Refer to SIR Disabling and Enabling.
  3. Remove the front bucket seat. Refer to Front Seat Replacement - Bucket.
  4. Using suitable force, lift the heated seat control module (2) to disengage the clip (1) from the bracket (3).

    5. Object Number: 2041135 Size: SH
  5. Press down the retaining clip (2) and pull the heated seat control module (1) away.

Installation Procedure

    Object Number: 2041135 Size: SH
  1. Press down the retaining clip (2) and push the heated seat control module (1) back in.

    2. Object Number: 2041134 Size: SH
  2. Engage the clip (1) of the heated seat control module (2) to the bracket (3), listen for an audible click to confirm fitting.
  3. Install the front bucket seat. Refer to Front Seat Replacement - Bucket.
  4. Enable the SIR system. Refer to SIR Disabling and Enabling.
  5. Connect the vehicle battery. Refer to Battery Negative Cable Disconnection and Connection.