Removal Procedure
Warning: Refer to Safety Glasses Warning in the Preface section.
- Remove the knee bolster. Refer to
Knee Bolster Replacement.
- Remove the left side floor air outlet duct to instrument panel (I/P) retainer retaining screw (3).
- Remove left side floor air outlet duct (2) from the HVAC module assembly (1).
Installation Procedure
- Install the left side floor air outlet duct (2) to the HVAC module assembly (1).
Caution: Refer to Fastener Caution in the Preface section.
- Install the left side floor air outlet duct to I/P retainer retaining screw (3) and tighten to
2 N·m (18 lb in).
- Install the knee bolster. Refer to
Knee Bolster Replacement.