GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Open the front and rear door.
  2. Warning: Refer to Safety Glasses Warning in the Preface section.


    Object Number: 2110812  Size: SH

    Note: When removing the sill name plates (1), make sure the retaining clips are retained in the sill name plates (1).

  3. Using a suitable tool carefully remove the sill name plates (1) from the vehicle (2).

Installation Procedure


    Object Number: 2110812  Size: SH

    Note: Before installing the rear side door sill name plates (1), make sure all of the retaining clips are not damaged, if damaged replace as necessary.

    Note: Make sure the lip of the weatherstrip sits over the sill plate.

    Note: Firmly push down on the sill plates (1) to install. Listen for an audible click to confirm fitting.

  1. Install the rear side door sill name plates (1) to the vehicle (2).
  2. Close the front and rear door.