GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the trim plate panel. Refer to Console Trim Plate Replacement.

  2. Object Number: 2040630  Size: SH

    Important: Rotate the transmission floor shift control indicator LED socket (1) counter-clockwise to remove.

  3. Remove the transmission floor shift control indicator LED socket (1) from the transmission floor shift control housing (2).

  4. Object Number: 2040631  Size: SH

    Important: DO NOT pull on the wiring harness (1). Damage to the wiring harness (1) may result.

    Important: Grasp the transmission floor shift control indicator LED (3) and the transmission floor shift control indicator LED socket (2) and pull in opposite directions.

  5. Remove the transmission floor shift control indicator LED (3) from the transmission floor shift control indicator LED socket (2).

Installation Procedure


    Object Number: 2040631  Size: SH

    Important: Make sure that the polarity of the transmission floor shift control indicator LED (3) corresponds to the transmission floor shift control wiring harness (1).

    Important: Push the transmission floor shift control indicator LED (3) into the transmission floor shift control indicator LED socket (2).

  1. Install the transmission floor shift control indicator LED (3) to the transmission floor shift control indicator LED socket (2).

  2. Object Number: 2040635  Size: SH

    Important: Rotate the transmission floor shift control indicator LED socket (1) clockwise to install.

    Important: In order to maintain uniform illumination at the transmission floor shift control indicator, always replace both transmission floor shift control indicator LEDs.

  3. Install the transmission floor shift control indicator LED socket (1) to the transmission floor shift control housing (2).
  4. Install the trim plate panel. Refer to Console Trim Plate Replacement.
  5. Check the operation of the transmission floor shift illumination.