Radio Scan Tool Information. Pontiac G8 2009

For 1990-2009 cars only

Makes 🢒 Pontiac 🢒 2009 🢒 G8 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Radio Scan Tool Information

Radio Scan Tool Data Parameters

Parameter	Operating Conditions	Expected Value	Definition
Ignition is ON, engine OFF, and vehicle is stationary
Antenna		Main set
Bass		Standard	The scan tool displays the current bass setting.
Battery Voltage	--	12 Volts	This displays volts. This is the voltage input supplied to the digital radio receiver.
CD Status	--	OK
CD Status		Valid	The scan tool displays Valid or Invalid
CD Status		Invalid	The scan tool displays Valid or Invalid
CD Type		CD
CD Changer Disc Number		1-6	This is the status of the CD changer.
Chime Mode		On	The scan tool displays On or OFF.
Chime Mode		Off	The scan tool displays On or OFF.
Dial Type		Valid	The scan tool displays Valid or Invalid.
Dial Type		Invalid	The scan tool displays Valid or Invalid.
Equalizer Boost		0
Equalizer		On	The scan tool displays On or OFF.
Equalizer		Off	The scan tool displays On or OFF.
Internal Communication	--	OK
Mute	Mute button pressed	On	The scan tool displays if the audio unit mute button has been activated or deactivated.
Mute	Mute button depressed	Off
Navigation System	--	Active
Navigation System	--	Inactive
Phone Active	--	Active
Phone Active	--	Inactive
Power Mode	--	Run	The scan tool displays Off, Accessory, Run or Crank Request. This is the state of the ignition switch.
Preset Status		1	The scan tool displays a preset number 1-6. This is the preset number when the radio is on a preset station.
Radio Button Stuck	--	Yes	This displays if a radio button is stuck
Radio Button Stuck	--	No	This displays if a radio button is stuck
Radio Button		A/C Off
Radio Button Status		Released
Radio Button Status		Depressed
Singe CD Track Number		1	The scan tool displays the current track number on the CD.
Search Sensitivity Status		Auto
Search Sensitivity Status		Manual
Signal Strength	--	Varies	This displays dBuV. This is the signal strength of the radio.
Speed Compensated Volume Curve		Zone 2
Source	--	Tuner	This indicates the source of the audio signal currently being output.
Surround Sound Status	--	On
Surround Sound Status	--	Off
Surround Sound Status		Stereo
Surround Sound Status		Mono
Treble		Standard	The scan tool displays the current treble setting.
Volume	0 - 100%	User Dependent	The scan tool displays the current volume setting.

Radio Scan Tool Output Controls

Parameter	Operating Conditions	Definition
Ignition is ON, engine OFF, and vehicle is stationary
Audio Mute	Special Functions Output Control	The scan tool displays if the audio unit mute button has been activated or deactivated.
Audio Mute	Special Functions Output Control
Left Front Speaker	Special Functions Front Speakers	The scan tool commands the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers.
Left Rear Speaker	Special Functions Rear Speakers	The scan tool commands the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers.
Right Front Speaker	Special Functions Front Speakers	The scan tool commands the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers.
Right Rear Speaker	Special Functions Rear Speakers	The scan tool commands the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers.