Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the transmission fluid pan and filter. Refer to Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement.
3. Remove the transmission electrical connector. Refer to Automatic Transmission Electrical Connector Passage Sleeve Replacement.

1

Manual Shaft Detent Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
12 N·m (106 lb in)

2

Manual Shaft Detent Assembly

3

Control Valve Assembly Bolt (Qty: 6)

Tip
Do not remove all the bolts in the control valve body assembly. Remove only the bolts indicated.

Tighten
8 N·m (71 lb in)

4

Control Valve Assembly

5

Fluid Pump Seal

Discard seal and replace with new.

6

Fluid Pump Seal

Discard seal and replace with new.

7

Centre Support Fluid Passage Seal

Discard seal and replace with new.