GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 G8 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Knock Sensor Replacement - Bank 2

Removal Procedure

    Object Number: 1949900 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the knock sensor (KS) electrical connector (1) from the KS (2).

    3. Object Number: 1949901 Size: SH
  3. Remove the KS to engine block retaining bolt (1) from the KS.
  4. Remove the KS (2) from the engine.

Installation Procedure

    Object Number: 1949901 Size: SH
  1. Install the KS (2) to the engine.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the KS to engine block retaining bolt (1) and tighten to 23 N·m (17 lb ft).

    3. Object Number: 1949900 Size: SH
  3. Install the KS electrical connector (1) to the KS (2).
  4. Lower the vehicle.